manualshive.com logo in svg

SPEX SamplePrep Genomax 2050, Руководство по эксплуатации, Страница: 22 / 26

Поделиться
Скачать
SPEX SamplePrep Genomax 2050 Скачать руководство пользователя страница 22

1300-87072-1A, REV 0

 

Spex® SamplePrep 

Page 22 of 26 

8.1 System Settings  

To access the Settings screen, touch the Settings Icon 

on the Home screen (Figure 4). The system can be 

upgraded, diagnostics view/exported, and files exported 

(Run History, Saved Protocols) and saved protocols 

imported, as well as the time display changed from 12-

hour to 24-hour, and Time and Date can be entered or 

changed, as shown in Figure 18. Touch inside the system 

date and time fields to change them. A pop-up window 

opens to enter Time or Date. Touch the SET button to 

confirm the change. Select  

12 hr or 24 hr time format, which will be displayed on the Run screen. Touching the Back Arrow 

button returns the user to the previous screen. 
Admin Lock Protocols can be 

accessed by touching the 

Protocols button. A 4-digit code is 

entered to view, enable, or edit a 

locked protocol (default code is 

0000). To change the passcode, 

touch the PASSCODE button, next 

enter the old passcode, then enter 

the new passcode, confirm the new passcode by re-entering it. After all 3 steps are complete 

touch the Change Passcode button to make the new 4-digit code active.  

8.2 Administrative Lockout Features 

The Administrative Lockout feature (passcode protected) restricts user access to specific 

protocols or ability to modify a protocol. From the Home Screen, touch the Settings Icon. The 

Admin Lock button is located on the bottom left of the screen. 

When the Admin Lock mode is disabled, the button will display “OFF” highlighted with a red 

background, as shown in Figure 18. To enable or disable the Admin Lock feature, touch the 

button to toggle ON or OFF. This will bring up a Number Pad to enter a 4-digit authorization 

code (default code is 0000). To abort entering a code, touch the Cancel key on the Number 

Pad. Note: If the wrong 4-digit code is entered the Admin Lock mode will remain enabled.  

8.2.1 Protocols in Admin Mode 

To choose the protocols to be available to users when in Admin Lock mode, touch the 

PROTOCOLS button (see Figure 18) and enter the passcode. Then touch ENABLE and touch 

the protocols to be made available. When finished, touch SELECT. Go back to the Saved 

Protocols screen to verify that the correct protocols are shown. 
To edit a Protocol, again touch PROTOCOLS on the Setting screen and enter the passcode. 

Then make sure EDIT is selected. Touch the Protocol to be edited and touch EDIT. Make the 

necessary changes to the Protocol and touch SAVE. 

Figure 18

 

Содержание Genomax 2050



























Отзывы:

Нет отзывов