Sperry Marine NAVIKNOT 600 SE, Руководство по эксплуатации, установке и обслуживанию

Страница: 75 / 138

NAVIKNOT 600 SE 056349/C
Service Setup Menu 6-19
Relay Speed Limit
Sets the lower and/or upper switching thresholds for the speed limit
relay output.
The speed limit relay output provides a status signal to external equip-
ment, to indicate that the actual speed has exceeded or fallen below a
set threshold. This signal may be e.g. for speed-dependent rudder angle
limiting or similar applications.
The switching behaviour of the limit relay is determined by the com-
bined settings of two values, the minimum (lower threshold) and the
maximum (upper threshold) value:
If only a minimum threshold value
is set and active, the relay is
attracted at speeds below and
released at speeds above the
threshold value.
If only a maximum threshold value
is set and active, the relay is
attracted at speeds above and
released at speeds below the
threshold value.
If both a minimum and a maximum
threshold value are set and active,
the relay is released at speeds
below the min. value, attracted at
speeds in-between both values and
released again at speeds above the
max. threshold.
If the max. threshold is set to a
value below the min. threshold, the
relay is attracted at speeds below
the min. value, released at speeds
in-between both values and
attracted again at speeds above the
max. threshold.
If both threshold values are de-activated or set to exactly the same
value, the limit relay function is disabled.
speed
MIN
relay ON relay OFF
speed
MAX
relay ON relay OFF
speed
MAX
relay OFF relay ON
MIN
relay OFF
speed
MAX
relay OFF relay ON
MIN
relay ON