Sperry Marine NAVIKNOT 600 SE, Руководство по эксплуатации, установке и обслуживанию

Страница: 23 / 138

NAVIKNOT 600 SE 056349/C
Display and Operating Keys 2-1
Chapter 2: Operation
2.1 Display and Operating Keys
Figure 2-1:
NAVIKNOT 600 SE
operating unit
➀
Main Display: shows one of five selectable pages, indicating
– Ground speeds, longitudinal and transverse
– Water speed, longitudinal
– “Docking” display (longitudinal and bow and stern trans-
verse ground speeds)
– Satellite status page
– Alarm page
➁
Sidebar: Shows additional information, indicating
• Operating mode (Master or Repeater).
•
➂
GPS signal and alarm Status
– GPS signal status (good/fair/poor)
– In case of pending alarms, acknowledge status and error
code(s) are displayed, alternating with GPS signal status.
•
➃
Supplementary Data, depending on active main display page
– on ground speed page: total and daily mile counters
– on docking display page: heading, course over ground and
rate of turn
– on satellite status page: GPS HDOP/VDOP, date and time
– on alarm page: date and time
➄
ACK key. Acknowledges pending alarms; mute alarm buzzer.
➅
MENU key. Calls up or quits the menu mode.
➆
MASTER key. Requests Master operating mode for this unit.
➇
Navigation Keypad:
In normal operational mode,
UP , DOWN keys scroll through main display pages.
LEFT , RIGHT keys scroll through list of active alarms.
In menu mode,
UP , DOWN , LEFT , RIGHT keys navigate through the operating menu;
ENTER confirms and stores settings made in the menu mode.
➈➉
DIM– / DIM+ . Adjust the display brightness.
MASTER
600 SE
N.MILES
DAILY
TOTAL
kn
1234.56
123456.7
12
8
.
0
0
.
12
1 2 5 6 7 3
4
10 9 8
GPS QUAL.
GOOD