background image

4

NOTE

Maintenance or operating procedures and techniques or information consid-

ered important enough to emphasize.

III. DESCRIPTION

The SURVIVAIR Opti-Fit air purifying respirator consists of a full facepiece made 

of pliable silicone rubber with two connectors for attaching particulate filters, gas 

and vapor cartridges, and cartridge/filter combinations as required for specific con

-

taminant protection.

WARNING

•  The employer is responsible for establishing that this respirator is suit

-

able for the user’s application.

•  Sperian cannot predict what will happen to this respirator in every po

-

tential environment. Materials can be chemically attacked if exposed to 

the wrong environment and may exhibit excessive corrosion or other 

forms of damage. Permeation or penetration of gases, liquids, or par-

ticles through the materials could be excessive. Extremes of tempera

-

ture might cause thermal degradation. Each of these things, or a combi

-

nation of them, could create conditions in which this Sperian respirator 

would be dangerous to use.

•  Before entering a hazardous environment while wearing this respirator, 

you must conduct safe, scientific tests to determine if the environment 

could render the equipment unsafe. Results of this testing should be 

well  documented.  Seek  the  help  of  a  certified  safety  professional  or 

industrial hygienist. DO NOT USE this equipment if the user would be 

endangered in any way through environmentally induced degradation 

of the materials in the apparatus.

•  All  persons  using  this  Sperian  breathing  apparatus  must  be  made 

aware of its limitations. We cannot be responsible for any damage to 

property, personal injury, or death in which environmental exposure is 

a contributing factor.

•  Do not use this respirator in environments where the concentrations 

of contaminants are unknown or are immediately dangerous to life or 

health (IDLH). IDLH atmospheres are defined as:

a. Those which the wearer could not breathe for short periods.

b. Those from which the wearer could not escape without the aid of 

the respirator.

c.  Those  which  have  an  immediate  or  delayed  adverse  effect  on 

health.

•  This respirator must be worn and used as specified in instructions.

•  Do not use this respirator if you have health or respiratory problems as 

identified by 29 CFR 1910.134 (appendix C) medical evaluation ques

-

tionaire or by a medical professional.

•  Do not use this respirator without the appropriate Sperian cartridges 

and/or  filters  securely  attached  onto  the  facepiece. Always  read  car

-

tridge labels prior to use and be certain that you have cartridges and/or 

filters that will provide the required protection. This respirator must be 

used for protection against only those air contaminants listed on the air 

purifying cartridge, filter, and/or the NIOSH approval label. Respirators 

labeled for protection against particulates only shall not be used for 

gases/vapors. Respirators labeled for protection against gases/vapors 

only shall not be used for particulates.

Содержание SURVIVAIR Opti-Fit S-Series























Отзывы: