Sper scientific 850048, Инструкция по эксплуатации

Страница: 5 / 36

5
ATTACHING AND DETACHING THE PROBE
Always turn the power OFF before attaching and
detaching the probe, and use caution. Please use
alignment quide markings on probe and meter for
proper connection (see image below).
To attach the probe to the meter:
1. Plug the probe into the connector port on top of
the meter.
2. Screw down the attached probe guard until it is
moderately tight.
To detach the probe from the meter:
1. Unscrew the probe guard (the piece that is directly on
top of the meter that connects the probe to the meter).
2. Holding the plug, pull the probe away from the meter.
DO NOT hold the cable and pull the probe and meter
apart as this may damage the probe connection.
Marker on
Meter Connection
Marker on
Probe Connection