Preparing the Datalogger
1. Insert the SD card into the SD card socket
on the bottom of the meter, ensuring that
the front of the SD card faces the back of
the meter.
2. Format the SD card as needed
(see page 14).
3. Set the real time clock if using the meter for
the first time (see page 12).
4. Set the decimal type if using the meter for
the first time (see page 13.)
Auto Datalogging
1. Set the sampling time to ≥ 1 second. Refer
to page 14.
2. Press
REC
. “REC will appear on
the LCD.
3. Press
LOGGER
. “REC” will flash on the
LCD and the alarm will sound while the
measurement data and time information
are saved to memory.
4. To pause datalogging, press
LOGGER
.
The meter will temporarily stop recording
and “REC” will stop flashing on the
LCD. Press
LOGGER
again to resume
datalogging. “REC” will flash on the LCD.
5. To finish datalogging, while the datalogger
is paused, press
REC
for 2 seconds or
longer. “REC” will
