disappear from the LCD to indicate that
datalogging has ended.
Note…
To enable/disable the touch-tone feature, see
page 13.
Manual Datalogging
1. Set the sampling time to 0 seconds. Refer
to page 14.
2. Press
REC
. “REC will appear on
the LCD.
3. Press
LOGGER
. “REC” will flash on
the LCD and the alarm will sound once
while the measurement data and time
information are saved to memory. The
position (location) number will appear on
the bottom of the LCD and will also be
recorded on the SD card.
Note…
To enable/disable the touch-tone feature, see
page 13. To change the position number, press
▼. The position number will flash on the LCD.
Press ▲ or ▼ to set the position number (from
1 to 99). To indicate the position location, P x
(x = 1 to 99) will appear on the lower display.
After selecting the position number, press
ENTER
to confirm.
4. To finish datalogging, press
REC
for longer
than 2 seconds. “REC” will disappear from the
LCD to indicate that datalogging has ended.
