8
Table Top Series
BEFORE INITIAL START-UP
Operation
•
Read the operating manual carefully before using the dispenser.
•
It is essential to disconnect the dispenser from the power supply before carrying out any repair work.
•
The dispenser is designed exclusively for use with drinking water that has a hardness of 6-8°dH.
If the hardness is higher, a suitable filter must be used.
•
Please observe the maintenance advice and intervals.
•
Any maintenance, cleaning and repair tasks that the end customer is not specifically authorised to perform
may only be carried out by trained service personnel.
•
For your own safety, and to ensure that your dispenser enjoys a long service life, you should only use
original Spengler spare parts.
•
The dispenser may only be used to prepare the products specified in the section on intended use.
•
Never submerge the dispenser or the power cable in water.
Identification markings on the drinks dispenser
The name plate (sample shown below) and the wiring diagram are located inside the dispenser on the right side
of the door frame. Before connecting the dispenser to the mains power supply for the first time it is critical to
confirm that the rated power on the name plate matches the mains power supply’s rating for the service area.
