9
2000 Series
Parts Ordering
Each regulator is assigned a serial number, which
can be found on the nameplate. Refer to the number
when contacting your local Sales Office for technical
information or when ordering parts.
When ordering replacement parts, reference the key
number of each needed part as found in the following
parts list. Separate kit containing all recommended
spare parts is available.
Parts List
2000 Series (Figure 8)
Key Description
1
Complete Valve
2
Union Ends
3
Body Assembly
4
Stem Guide
5
Washer, Wave Spring
6 Bonnet
7
“V” Packing Assembly
8 Nuts
9 Frame
10
Mounting Screws
11
Lock Washer
12
Frame Locking Nut
13
Adjusting Nut
14
Indicator Assembly
15
Adjusting Spring
16
Safety Spring Assembly
17 Guide
18 E-Ring
19
Thermal System Assembly
Maintenance
The adjusting nut of each regulator is permanently
lubricated before leaving the factory, and the valve
stem is equipped with a spring loaded Teflon packing
gland assembly so that no maintenance should be
required for the life of the regulator.
The valve stem is set and locked at the factory in a
permanent position to give the valve its proper travel.
No adjustment should be made on the valve stem after
the regulator leaves the factory.
The Spence Strainer protects the valve disc and
seat of the regulator from the destructive effects of
scale, etc. The strainer should be blown out at regular
intervals by removing the plug. For quick blowouts, a
hand valve may be installed on the strainer in place of
the plug.
