EBM30N/TEG
–
Installation and User Guide
Document Number: 81773-4
Issue: 2
Spellman High Voltage Electronics Limited
|
+44 (0)1798 877000
|
Broomers Park, Pulborough, W. Sussex, UK. RH20 2RY
TEMPLATE: 40776 ISS A | ECN I-10067 | DATE: 16/04/21
QA/ENG/SAL
© 2021 Spellman High Voltage Electronics Corporation
Page 3 of 16
SAFETY
DANGER
HIGH VOLTAGE
RISK OF ELECTROCUTION
Observe extreme caution when working with this equipment
High voltage power supplies must always be connected to
protective earth
Do not touch connections unless equipment is turned off and
the capacitance of both the load and power supply are grounded
Allow adequate time for discharge of internal capacitance of the
power supply
Do not ground yourself or work under wet or damp conditions
Servicing Safety
Maintenance may require removing the Instrument cover with
the power on
Servicing should only be done by qualified personnel aware of
the hazards
Return to supplier for servicing