S4H-RE-00, S4H-RE-10
13
5.d. In this screen you can enable / disable sending email
messages for each device separately.
6. WiFi relay control from more that one Smartphone
If wifi
relay is configured you don’t have to configure it again when you are adding it to another
mobile device.
Keep status and pulse mode settings are bounded with hardware of wifi relay and change of this
options affect settings in all mobile devices where is this relay inserted.
7.
Notes
7.1.
The Wi-Fi relay maintains constant connection to the cloud for its performance. This
connection uses many tools that are beyond your view control and can suffer from failures with
various durations (AP, Ethernet, servers, etc.). If the Wi-Fi relay connection to the cloud is lost,
the Wi-Fi relay will pass to its safe state: the output relays are either switched off or remain in
the last state selected (see setting 3.3.c). If, for any reason, Wi-Fi relay communication with the
cloud is lost for longer than 1 hour, a connection loss message will be sent to your
smartphone/tablet. The Wi-Fi relay will make repeated attempts to reconnect during that time. If
connection between the Wi-Fi relay and the cloud is resumed after the fault has been
eliminated, the output relays will switch to the last status selected.
7.2.
The Wi-Fi relay can be controlled from several smartphones/tablets if present in their
application. The Wi-Fi relay will switch to the status sent to it (the most recent status is valid
irrespective of the device from which it was sent).
7.3.
The status of the Wi-Fi relay outputs is displayed in all the smartphones/tablets that have
this relay set. However, if communication between the Wi-Fi relay and the cloud is lost, the
status existing before the loss is displayed (automatically set to ON / OFF state after
communication lost or after power down will not appear to relay state and relay history )
