background image

EN

5-14-2015

submission process found on our website or call Horizon to obtain a Return 
Merchandise Authorization (RMA) number. Pack the Product securely using a 
shipping carton. Please note that original boxes may be included, but are not 
designed to withstand the rigors of shipping without additional protection. Ship 
via a carrier that provides tracking and insurance for lost or damaged parcels, 
as Horizon is not responsible for merchandise until it arrives and is accepted at 
our facility. An Online Service Request is available at http://www.horizonhobby.
com/content/service-center_render-service-center. If you do not have internet 
access, please contact Horizon Product Support to obtain a RMA number along 
with instructions for submitting your product for service. When calling Horizon, 
you will be asked to provide your complete name, street address, email address 
and phone number where you can be reached during business hours. When 
sending product into Horizon, please include your RMA number, a list of the 
included items, and a brief summary of the problem. A copy of your original 
sales receipt must be included for warranty consideration. Be sure your name, 
address, and RMA number are clearly written on the outside of the shipping 
carton. 

NOTICE: Do not ship LiPo batteries to Horizon. If you have any issue 
with a LiPo battery, please contact the appropriate Horizon Product 
Support offi ce.

Warranty Requirements

 

For Warranty consideration, you must include your original sales receipt verifying 
the proof-of-purchase date. Provided warranty conditions have been met, your 
Product will be serviced or replaced free of charge. Service or replacement 
decisions are at the sole discretion of Horizon.

Non-Warranty Service

Should your service not be covered by warranty, service will be completed and 
payment will be required without notifi cation or estimate of the expense unless 
the expense exceeds 50% of the retail purchase cost. By submitting the item 
for service you are agreeing to payment of the service without notifi cation. 
Service estimates are available upon request. You must include this request 
with your item submitted for service. Non-warranty service estimates will be 
billed a minimum of ½ hour of labor. In addition you will be billed for return 
freight. Horizon accepts money orders and cashier’s checks, as well as Visa, 
MasterCard, American Express, and Discover cards. By submitting any item to 
Horizon for service, you are agreeing to Horizon’s Terms and Conditions found 
on our website http://www.horizonhobby.com/content/service-center_render-
service-center. 

ATTENTION: Horizon service is limited to Product compliant in the 
country of use and ownership. If received, a non-compliant Product 
will not be serviced. Further, the sender will be responsible for 
arranging return shipment of the un-serviced Product, through a 
carrier of the sender’s choice and at the sender’s expense. Horizon 
will hold non-compliant Product for a period of 60 days from 
notifi cation, after which it will be discarded.

Содержание SR4000T













Отзывы: