Spektrum DX5C Скачать руководство пользователя

Страница: 20 / 24

SPEKTRUM DX5C • TRANSMITTER INSTRUCTION MANUAL

TROUBLESHOOTING GUIDE

PROBLEM

POSSIBLE CAUSE

SOLUTION

The system will not
connect

Transmitter and receiver too near each other

Move transmitter 8 to 12 feet (2.4 to 3.6m) from receiver

Transmitter and receiver too near large
metal objects (vehicles, etc.)

Move away from large metal objects (vehicles, etc.)

Selected model is not bound in transmitter

Make sure correct model memory is selected and that
transmitter is bound to the model

Transmitter accidentally put in bind mode so
receiver is no longer bound

Rebind transmitter and receiver

Bind plug left installed in bind port

Rebind transmitter to the vehicle and remove the bind plug
before cycling power

Vehicle battery/Transmitter battery charge is
too low

Replace/recharge batteries

The receiver goes
into failsafe mode a
short distance away
from the transmitter

Check the receiver antenna to be sure it is
not cut or damaged

Replace or contact Horizon product Support

Make sure receiver antenna is in an antenna tube and is
above vehicle

Receiver quits
responding during
operation

Low battery voltage

Completely recharge battery

Loose or damaged wires or connectors
between battery and receiver

Do a check of the wires and connection between battery
and receiver. Repair or replace wires and/or connectors

Receiver loses its
bind

Transmitter accidentally put in bind mode,
ending bind to receiver

Bind transmitter to receiver

Can’t assign
functions to the
desired switches or
buttons

Buttons and/or switches are already
assigned to another function

Re-assign functions to other buttons or switches to free up
the switch so it can be assigned to your designated function

Function requires a switch or trimmer, but-
tons have limited functionality

Select a switch or trimmer if your designated function will
not work with a button.

PART #

PARTS DESCRIPTION

SPM6719

Spektrum DX6R Transmitter Case

OPTIONAL PARTS LIST

Weitere optionale Bauteile und Details sind unter SpektrumRC.com verfügbar.

TELEMETRY TROUBLESHOOTING GUIDE

PROBLEM

POSSIBLE CAUSE

SOLUTION

No telemetry options are avail-
able in the transmitter

Your transmitter is in 5.5ms mode

Select a different DSMR protocol, rebind and then
recalibrate

The telemetry screen is blank

The telemetry screen needs to be conﬁ gured
in the transmitter telemetry menu

Conﬁ gure the telemetry screen

SMART battery information is
not coming through telemetry

Not using a SMART Throttle compatible ESC

A SMART compatible Spektrum ESC is required
for SMART Battery data to be sent through
telemetry

SMART ESC data is not coming
through telemetry

SMART ESC is not plugged into the correct
port on the receiver.

Connect the ESC to the Throttle (THR) port on the
receiver

Содержание DX5C

























Результаты поиска

Содержание DX5C

Отзывы:

Похожие инструкции для DX5C

Бренды по названию

Популярные бренды

Spektrum DX5C, Инструкция по эксплуатации

Результаты поиска

Содержание DX5C

Отзывы:

Похожие инструкции для DX5C

Бренды по названию

Популярные бренды