background image

EN

24

WARRANTY SERVICES
Questions, Assistance, and Services – 

Your local hobby store and/or place 

of purchase cannot provide warranty support or service. Once assembly, setup 
or use of the Product has been started, you must contact your local distributor 
or Horizon directly. This will enable Horizon to better answer your questions 
and service you in the event that you may need any assistance. For questions 
or assistance, please visit our website at www.horizonhobby.com, submit a 
Product Support Inquiry at https://www.horizonhobby.com/content/service-cen-
ter-render-service-center or call the toll free telephone number referenced in 
the Warranty and Service Contact Information section to speak with a Product 
Support representative. 

Inspection or Services – 

If this Product needs to be inspected or serviced and 

is compliant in the country you live and use the Product in, please use the Horizon 
Online Service Request submission process found on our website or call Horizon 
to obtain a Return Merchandise Authorization (RMA) number. Pack the Product 
securely using a shipping carton. Please note that original boxes may be included, 
but are not designed to withstand the rigors of shipping without additional protec-
tion. Ship via a carrier that provides tracking and insurance for lost or damaged 
parcels, as Horizon is not responsible for merchandise until it arrives and is 
accepted at our facility. An Online Service Request is available at http://www.hori-
zonhobby.com/content/_service-center_render-service-center. If you do not have 
internet access, please contact Horizon Product Support to obtain a RMA number 
along with instructions for submitting your product for service. When calling 
Horizon, you will be asked to provide your complete name, street address, email 
address and phone number where you can be reached during business hours. 
When sending product into Horizon, please include your RMA number, a list of the 
included items, and a brief summary of the problem.  A copy of your original sales 
receipt must be included for warranty consideration. Be sure your name, address, 
and RMA number are clearly written on the outside of the shipping carton. 

Provided warranty conditions have been met, your Product will be serviced or re-
placed free of charge. Service or replacement decisions are at the sole discretion 
of Horizon. 

NOTICE: Do not ship LiPo batteries to Horizon. If you have any issue 
with a LiPo battery, please contact the appropriate Horizon Product 
Support office. Warranty Requirements - For Warranty consider-
ation, you must include your original sales receipt verifying the 
proof-of-purchase date. 

Non-Warranty Service – 

Should your service not be covered by warranty, 

service will be completed and payment will be required without notification or 
estimate of the expense unless the expense exceeds 50% of the retail purchase 
cost. By submitting the item for service you are agreeing to payment of the ser-
vice without notification. Service estimates are available upon request. You must 
include this request with your item submitted for service. Non-warranty service 

Содержание AR631





























Отзывы: