Manual for ombra BST
LON slat angle automat
Order No.: 341 298
2.2. Mounting
It is essential to observe the enclosed assembly instructions during assembly.
The device is designed for Safety Extra Low Voltage (SELV).
Electrical devices must be assembled and installed by trained
personnel only.
Relevant standards, guidelines, regulations and provisions of the
respective country must be observed when planning and installing
electrical systems.
The device specifications must be observed.
The device function is determined by the application program. Only
programs which have been released by spega for this device may be
loaded.
The system installer must ensure that the application program and
the associated parameterization correspond to the circuitry and the
intended use of the device.
Version 1.00
Page 9 / 34
08.09.2020
