F10F Series Booster User’s Manual
-
11
-
6.3.2. Connection
A. Outdoor Port: donor antenna cable is connected with Outdoor Port;
B. Indoor Port: service whip antenna is connected with Indoor Port;
C. DC IN: connected with Power adaptor.
6.3.3. Accessories selection
Please pay attention to the two points of “frequency” and “impedance” during the
selection of the accessories. All accessories shall support the repeater’s frequencies
from feeder line, antenna and splitter to combiners etc. For example, the repeater’s
frequency is GSM900, so all the accessories must support the GSM900 frequency. And
the repeater’s impedance is 50ohm, so the accessories shall all be 50ohm . To use any
other impedance of coax will put an extra load on your repeater, shorten its life span
and decrease the system performance.
6.4. Repeater Settings
Please check very carefully all cable connections are correct and firm before running
operation test and then carry out following tests.
6.4.1. Switch on power
After power is on, check firstly the alarm and power LEDs.
?
Status and definition of POWER indicators:
