Easy Flash Module 3.0 User Manual
EFM 3.0 V1.1 Speed Turtle Engineering LLC Page | 8
vehicle switch configurations.
•
Integrated Vehicle Switch Mode
–
Integrated vehicle switch mode is active when a specified
vehicle switch is pressed twice in quick succession. The bed lamp switch is the integrated
vehicle switch for all pickups. The hazard lamp switch is the integrated vehicle switch for all
other vehicles. Another quick double press of the button will turn the module off.
Active Mode Priority Example
Example 1
–
Park mode disabled: If switch input 2 is active, EFM 3.0 will use the configurations
saved for switch input 2. If switch input 1 is then activated, EFM 3.0 will use the configurations
for switch input 1 due to its higher priority.
Example 2
–
Park mode enabled: If the vehicle is in park and switch input 1 is activated, EMF 3.0
will use the park mode configurations due to its higher priority. Once the vehicle transmission is
taken out of park, EFM 3.0 will use the configurations for switch input 1.
Pattern Selection
There are ten selectable patterns for every vehicle. These patterns are adjusted per vehicle
to ensure the best possible pattern selection based on supported vehicle lights and light locations.
Individual patterns can be configured for each active mode using the
STE Configuration Utility
. The
STE Configuration Utility
can be download for free from the support page of the Speed Turtle
Engineering website.
Individual Lamp Configuration
Much like the pattern configuration, the EFM 3.0 allows individual lamp configuration of
each active lamp mode. These individual lamp configurations can be configured using the
STE
Configuration Utility
. This configuration allows specific lamps to be deactivated.
Dash Indicator
When the EFM 3.0 module is in any of the five active modes a dash indicator will blink to
signify the module is active. The dash indicator is the fog lamp symbol.
