V1.0 Created on Apr 10
th
2013
King Golden Ltd.
Speed Passion Reventon Pro 1.1 - 2 cell LiPo User Manual
Page 13
12.2.5 Percentage Braking-ABS:
The ESC provides a proportional brake function. Braking force is related to the position of the
throttle stick. Maximum brake force refers to the ESC braking force when the throttle stick is
located at the top point of the braking zone. A large brake force value can shorten the brake
time, but it may damage gears.
12.2.6 Percent Drag Brake:
Sets the amount of drag brake applied at neutral throttle to simulate a slight braking effect of
a neutral brushed motor while coasting.
12.2.7 Throttle Percent Reverse Force:
Sets how much power will be applied in the reverse direction.
12.2.8 Radio Neutral Range:
(Dead band) Please see the illustration below to adjust the neutral range.
12.2.9 Over Heat Protection:
If the function is activated, the power output will be cut-off when the temperature of the ESC
or the internal temperature of the motor reaches 95ºC / 203
℉
for more than 5 seconds.
When the protection engages, the power to the motor will be cut off.
Exemption Clause:
Speed Passion does not have control over the proper installation or use of this product therefore no
liability for any damages incurred in its use will be accepted. Operation of this product is at the user’s
risk. The use of radio control models requires a degree of skill. If you are a beginner please consult the
advice of an experienced user to prevent injury to goods or other persons.
Caution:
1)
Do not operate the ESC at voltages lower than 6.0V or higher the 8.4V battery, damage to the ESC
can result.
2)
When mounting the brushless motor to the car, pay careful attention to the length of the motor
screws. Screws must not exceed 4.0mm in depth. Any longer than this and internal damage to the
motor will result which will void the product warranty.
3)
Ensure all connections are secure before using this product.
