Page 1 of 56
SHENZHEN SPEEDLEADER TECHNOLOGY CO.,LTD. LED Video Processor
This symbol warns the user that there is the hazardous voltage exposed inside
the equipment and there is the electric shock hazard.
This equipment must be connected with ground wire.
This equipment needs a rated power voltage. Ensure that the input voltage
error should be between - 10% and +10%.
Do not connect AC power cord with another AC power cord
which
may lead to
excessive noise.
Please use the equipment when the surrounding temperature is from -10
℃
to
45
℃
, and the relative humidity is 90% or less than that.
Do not use this equipment in certain special circumstances, such as, closing to
a heat source, which may cause overheating of the equipment and damage it.
Please use it in a well-ventilated place and pay attention not to block the
equipment vents.
Do not expose this equipment in the place which has the possibility for
accidental collision or vibration, and reinforcement processing is necessary in
the vibration place.
When you use the equipment, please make sure that there are no objects, such
as water and metal objects, inside the equipment. Otherwise, it will damage the
equipment and cause a fire.
If there is any irregularity or abnormality for the equipment, please
immediately turn off the power supply, disconnect the AC power cord, and see
“Trouble Clearing”.
If this equipment is damaged, do not disassemble it. Please contact our
maintenance service department.
