SPEED LEADER LVP8000 Скачать руководство пользователя страница 2

Страница: 2 / 58

About the Manual

Without the written permission of the company, it is forbidden for any company or

individual to imitate, copy, or transcribe part or all of the contents of the manual. It is not

allowed to have the commodity publicity or achieve any commercial or profit-seeking

purpose in any form (electronic form, mechanical form, photocopying form, recording

form, or other possible ways).

Please carefully read this manual before using this equipment. All the product

specifications and information mentioned in the manual are only for reference. If there is

the content updating, the company will not make further notice. Unless there is a special

agreement, this manual is only taken as an instruction, and all statements and information

will not constitute a guarantee of any kind.

Brand Royalty

VGA and XGA are the registered trademarks of IBM Corporation.

VESA is a trademark of the Video Electronics Standards Association.

The logo of HDMI and High-Definition Multimedia Interface are the trademark of HDMI

Licensing LLC.

Safety Instructions

This symbol prompts the user that there are the important operation and

maintenance instructions in the user manual.

Содержание LVP8000



























































Результаты поиска

Содержание LVP8000

Отзывы:

Похожие инструкции для LVP8000

Бренды по названию

Популярные бренды

SPEED LEADER LVP8000, Руководство пользователя

Результаты поиска

Содержание LVP8000

Отзывы:

Похожие инструкции для LVP8000

Бренды по названию

Популярные бренды