Gnome P. User Guide
Power
supply
Integrated battery
Li-ion, 750-900 mAh
External source
6 V
Battery charge time
4 hrs
Rated voltage
at mic input:
8 mVeff
at line input:
0.7 Veff
at output:
0.7 mVeff
Current consumption from
the battery
Active mode
30 m
А
max.
VA mode
3 m
А
max.
Stand-by mode
1 m
А
max.
Current consumption from USB
450 m
А
max.
Current consumption from external power supply
300 m
А
max.
Clock deviation from the “real” time
max. 5 sec a day
PC interface
USB 2.0 High or Full-speed
Size:
75.3
×
48.7
×
12.9 mm
Weight (with battery)
70 g
The voice-recorder may be connected to a PC via the USB interface (2.0 High- or Full-
speed). The provided data transfer rate is up to 215 or 460 kB/sec.
4.
VOICE-RECORDER PROTECTION
4.1. Protection from unauthorized access
To protect Gnome P from unauthorized access, playback of recorded data and modific-
ation of voice-recorder parameters are implemented only by means of dedicated software.
If desired, the user can protect voice-recorder parameters and recorded information with di-
gital PIN-code (it is recommended to set no less than 4 digits).
A PIN-code is to be set using the Gnome P software (see 7.3.2). The manufacturer sets
no PIN-code by default.
4.2. Recorded data protection
To avoid unauthorized access and recorded data forgery, time and date of recording
start/end are set automatically. Moreover, Gnome P’s operating parameters are registered
for every recording session.
Gnome P does not allow any modification of data recorded into the flash memory.
6
