Gnome-Nano II
34
Figure 37: Changing password.
While setting password for the first time, leave the
Current
password
input box empty. In the
New password
box, specify
digits (from 1 to 8) you want to use as password, confirm the
password by entering the same set of digits in the
Confirmation
input box, and click
OK
.
To change password, fill in all input boxes in the dialog (Figure 37).
To disable password, leave the
New password
and the
Confirmation
boxes empty.
Figure 38: The Change password dialog.
After the password is set, the application will require entering
password the next time you connect the device to PC.
In the dialog (Figure 38), enter your password in the relevant box
and click
OK
.
For security purposes you are recommended to use at least four digits for password.
Figure 39: Invalid password.
If the device is not connected or password is wrong (Figure
39),
you cannot access the device and configure device settings.
9.4.15
Deleting Recordings after Entering Invalid Password
Figure 40: The Security dialog
There is an opportunity to delete all recordings
from device memory by clicking the
Security
button located in the application main screen.
In the opened dialog box tick the
Delete
records in the recorder when enter the
incorrect password
option and click
Close
(Figure 40).
Figure 41: Confirming the Security option
When enabling or disabling this option, enter
password to confirm this action (Figure 41).
