Operation Manual
19
SOFTWARE
8
8.1
Gnome-Nano II Software Features
After connecting the device to the PC, you can use it as a FAT32 external memory unit. Nevertheless, to
access all functions, you will need the software that comes with the recorder: device drivers and the
Voice
Recorder Manager
application.
The device configuration is performed via
Manager
.
Voice Recorder Manager
enables the following:
•
Viewing device information (serial number, available memory size, battery charge level, etc.).
•
Setting recording options (recording format, signal source, gain control, etc.).
•
Viewing the list of recordings and performing standard set of operations (playback, deletion and
copying).
8.2
Software Installation
8.2.1
System Requirements
The minimum system requirements for
Manager
are:
•
PC with available USB port and a CD drive;
•
CPU: Intel Pentium III;
•
RAM: 256 Mbyte;
•
Audio I/O sound card;
•
Headphones;
•
Mouse, keyboard;
•
At least 16 GB of free hard disk space to store recorded data.
8.2.2
Driver Installation
To be able to work with the
Voice Recorder Manager
application, first you must install the drivers that come
with the device on the CD. The drivers can also be recorded in the device storage.
Only a user with administrator rights can install the drivers.
Password must be disabled before installing the drivers. Before installing the drivers, make sure
the recorder is not protected with a password.
Connect your device to your PC and, if required, insert the installation CD or open the relevant section on the
device storage once the system detects the recorder.
The following instruction describes installation process for
Windows 7
.
