6 |
P a g e
6
DESCRIPTION & OPERATION
SECTION 1 Instruction Manual
DESCRIPTION & OPERATION
SECTION 1
INTRODUCTION
Optical Loop Interface Unit is designed to control the height of the paper loop that forms between an
outfeeding printer or unwinder and the associated infeeding Spedo Forms Cutter. A forms cutter of other
manufacture can be used provided it is fitted with a synchronisation input facility. The unit is positioned on
the floor, mounted on 4 feet between the two units.
Fig 1.1 Spedo Optical Loop Switch 2232
TECHNICAL DATA
Paper Loop Sync
Switched relay contact normally open. Closed across pins 1 & 3 when paper is detected
Mains Power
240 V +/- 10 %, 50/60 Hz.
Mains Fuse
800 mA (Type F800mA)
Dimensions
Depth:
26 cm (incl. feet)
Width:
60 cm
Height: 26 cm (incl. feet)
Weight (with leads):
8.6 kg (approx.)
