
14
Changing Batteries
The Watchdog Wireless Rain
+Temp
Station is designed to run
an entire growing season (or more) on one set of batteries.
Actual battery life depends upon the number of data transmis-
sions which is related to rainfall. The battery level indicator in
SpecConnect and the Watchdog mobile App is based upon a
count of transmissions. Monitor the reported battery level to
determine when to replace the battery.
Important: Only use AA lithium batteries in the Watch-
dog Rain
+Temp
Station. Do not use AA alkaline batteries.
They will have short battery life and the reported battery
level will be greatly overstated.
Replacement Procedure
•
Carefully remove the electron-
ics assembly from the cylin-
der. See Step 5 of the Installa-
tion procedure (p. 11).
•
If the device is not already
switched OFF, turn it off by
toggling the power switch to-
ward the battery connector
•
Replace the three lithium AA
batteries located in the battery
holder.
•
Return the power switch to the
‘
ON
’
position. Ensure the
green LED blinks three times.
Important: After the three flashes
(and
within 10 sec-
onds), perform a
“
double tip
”
of the tipping spoon by
moving it back and forth within 1 second. The LED
should flash 5 times in quick succession. This indicates
the rain sensor is working properly and the device will
attempt to send a data packet to SpecConnect within 2
minutes. If the 5 LED flashes are not seen, turn the
switch
‘
Off
’,
wait 30 seconds and repeat the proce-
dure.
•
Re
-
insert the electronics into the cylinder.
•
Re
-
install the blue cap and the Rain Bucket
Содержание WatchDog Wireless Rain+Temp Station
Страница 1: ...Wireless Rain Temp Station PRODUCT MANUAL Item 3200R2 ...
Страница 19: ...19 ...