Spectrum WatchDog Wireless Rain+Temp Station, Руководство по эксплуатации продукта

Страница: 11 / 20

11
3. Remove the Rain Bucket
Start by loosening the four screws at the base of the rain bucket.
They should be loose enough to twist the bucket in relation to
the base. Remove and discard the rubber band from the tipping
spoon.
4. Mount the Rain Station to the mast
With the rain bucket removed, mount
the Rain Station to the mast (not in-
cluded) using the provided U - bolts
and a 7/16” wrench. It is imperative
that the collector is level when
mounting the station to the mast. Use
the bubble level located on the inside
of the Rain Collector to confirm that
the collector ’ s base is level. Adjust
the U - bolts or mounting mast as re-
quired.
5. Power up the Rain Station
Lift the blue cap off of the elec-
tronics container, being careful not
to disturb the electronics assembly
while doing so. There is a risk of
pulling the electronics out with
the cap. This can result in dam-
age to the cables.
Carefully lift the electronics brack-
et until it is just outside the cylin-
der. Pay attention to the tension
applied to the wiring as you lift the
bracket. Take extra care not to ap-
ply tension to the thin black anten-
na cable connected to the board.