0118738R6 Page 4 of 15
Audience-side panel
The audience-side panel can be removed to access the rear portion of the rack
cube and lectern.
1. To remove the panel, open the document camera drawer fully.
Figure 2A
.
2. Unscrew the (2) knobs inside the lectern behind the audience-side
panel and remove. Magnets are installed at the top corners of the
panel to prevent tipping.
Figure 2B
.
3. Carefully pull the top of the panel away from the lectern to release
the magnets, then lift the panel out.
Figure 2C
.
4. To replace the panel, insert the panel tabs back into base panel slots,
then tip the panel back up into position. Replace the knobs, and
tighten securely.
Figure 2A
Phillips
screwdriver
Tools
Required
Figure 2B
Open document
camera drawer
Knobs
Audience-side
panel
Slots in base panel
Magnet inside each
upper corner
Figure 2C
