2” Grommet
2” Grommet
0118738R6 Page 9 of 15
Figure 7B
Figure 7C
Max cutout area
Worksurface opening below
Worksurface
Overbridge
Section View
Overbridge panel
Note: The max cutout areas shown are general
recommendations only. The final location of the cutout(s)
on the panel will be determined by:
•
The size of the cutout(s)
•
Location preference of each device (left, centered, right)
•
The vertical depth of the installed device
•
The available worksurface opening under the
overbridge on your specific Spectrum lectern.
Note: The Overbridge Control Console
™
has been designed
for many of the currently available controllers on the market,
however, modified cutouts should be reviewed by Spectrum
to ensure clearance of brackets, keyboard slides, or other
objects under the worksurface.
Contact Spectrum to specify cutout size(s) and location(s).
Cutouts can be made in the blank insert panel by the
customer after the lectern has been purchased, but are
only recommended within the cutout area shown.
