Unit-to-unit
bracket
(2) 1/4-20 x 5/8”
PHMS
0191978R4 Page 3 of 4
1.
Carefully flip the desk upright-this will require at least two people.
2. Attach the chair rail with (2) 1/4-20 x 2” FHM screws as shown.
Note the chair rail should extend above the worksurface, and the
countersunk holes should be on the outside.
Figure 3.1, 3.2.
3. Tighten all screws securely.
Figure 3.2
1/4-20 x 2” FHMS
(2 required)
Chair rail
Figure 3.1
1/4-20 x 2”
FHMS
Chair rail
Extends above worksurface
Attach chair rail
3
Attaching desks together (optional)
4
Figure 4
Desk #1
Desk #2
Two desks can be attached together with the included unit-to-unit bracket.
1.
Locate the desks next to each other in their final position.
2. Attach the unit-to-unit bracket to the rear of the legs (behind cord channel)
using the existing cord channel screws. (Loosen screws to install, then
re-tighten).
