Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt. To
report information regarding missing parts or damage, to purchase parts or acces-
sories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
1. Place the worksurface face-down onto a non-abrasive surface.
2. Align the legs with the mounting holes, and install (2) #14 x 7/8”
PHSM screws into each leg but do not tighten completely yet.
Figure 1
.
Figure 1
Worksurface
#14 x 7/8” PHSM
(2 per leg)
‘U’ Channel
0191978R4 Page 1 of 4
Assembly Instructions
Assembly Instructions
(4) 026064
1/4-20 x 5/8” PHMS
(1) 025069
Glide wrench
The side of the leg with
the threaded hole should
be on the flip-top side
Flip-top
(1) 0167153
Unit-to-unit bracket
(2) 026011
1/4-20 x 2” FHMS
(1) 052547 - Right Leg
(1) 052544 - Left Leg
(1) 0152133
44”W x 30”D
Worksurface w/ support
(1) 052469
Chair rail
(1) 052468
44” Cord channel /
Modesty panel
Esports Evolution Desk (44”W)
22860
(4) 037779
5/16-18 x 1”
Glide
(4) 0101382
#14 x 7/8” PHSM
Right leg
Left leg
Attach legs to worksurface
1
X2
Assembly tip: Do not tighten component
fasteners completely until all have been
installed. Keeping them loose will help with
alignment between parts during assembly.
