0109742R3 Page 1 of 3
Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt.
To report information regarding missing parts or damage, to purchase parts
or accessories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
Instructor-side locking door
for Inspiration Lectern
55405
Phillips
screwdriver
Tools Required
4mm Hex wrench
(included)
Glide wrench
(included)
or 7/16” wrench
(for 42”H lectern)
Figure 1
Locking door
Lock pawl
36”H Inspiration
Lectern
42”H Inspiration
Lectern
(1) 025039
4mm Hex wrench
(1) 025069
Glide wrench
(5) 0100167
8-32 x 1/2” PH
Thread-cutting screw
(1) 0109616
29” Solid
locking door
(2) 037542
#8 x 5/8” PHSM
screw
(2) 026296
Recessed bumper
with washer
(2) 0102297
7mm x 30mm JC
Wood screws
(2) 0107139
Offset door stop
(1) 041943
1/4-20 Locknut
(1) 026059
1/4” Washer
Note: The 55405 locking door can be used on 36”H or 42”H Inspiration
lectern versions.
• The 42”H lectern is commonly equipped with the door and keyboard
tray options.
• The 36”H lectern can be equipped with the door or keyboard tray.
Not both at the same time.
• If the door is used on a 42”H lectern without the optional keyboard tray,
Spectrum recommends installing a 4RU rack-mount blank above the
door to maintain security.
1. Install door to lectern
1. Align and attach the door hinge to the right side panel mounting
holes with (5) 8-32 x 1/2” PH thread-cutting screws.
Figure 1
.
2. Tighten screws securely, but do not overtighten.
Note: If you are using an electric drill driver, be
careful not to overtighten the screws. Use a low
torque-setting to prevent damage to the threads.
8-32 x 1/2” thread-
cutting screws
(5 required)
Inspiration lectern
right side panel
