A. Attach the T-supports to the worksurface using (4) 1/4-20 x 1-3/4" PHM screws.
Figure 3
.
B. Attach the cord channel to the T-supports using (4) 1/4-20 x 5/8" PHM screws.
C. Attach the chair rail using (2) 1/4-20 x 2" FHM screws.
(These screws will attach to the T-support ends.)
Chair Rail
1/4-20 x 2" FHMS
T-Support
Cord Channel
1/4-20 x 5/8" PHMS
(4 req'd)
1/4-20 x 1-3/4" PHMS
(4 req'd)
W k
f
3. Attach T-Supports, Cord Channel, & Chair Rail
055311R5 Page 5 of 7
Worksurface
Figure 4
Figure 3
A. Connect the cords to the control box as shown in
Figure 4
.
B. Use the cord clips to secure the cords to the underside of the worksurface.
C. Carefully flip the desk upright-this may take several people.
Control Box
Leg Cords
Control Panel
Cord
Power Cord
4. Connect Cords
055311R5 Page 5 of 7
