A. Carefully flip the worksurface face-down onto a non-abrasive surface.
Figure 1
.
B. Attach each leg to the worksurface using (8) 1/4-20 x 5/8" PHM screws.
Control
Box
Control
Panel
Right Leg
Left Leg
#8 x 3/4" PHSM
(4 req'd)
Electric ECS Desk Assembly / Setup:
1. Attach Legs to Worksurface
055311R5 Page 4 of 7
A. Attach the control box using (4) #8 x 3/4" PHSM screws and the pre-drilled holes.
Figure 1
.
B. Determine which side of the desk you want to mount the control panel (left or right side.)
C. Attach the control panel using (2) #6 x 1/2" PHSM screws and the pre-drilled holes.
Figure 1
1/4-20 x 5/8"
PHMS
Worksurface
Left-side control
panel location
Right-side control
panel location
2. Attach Control Box & Control Panel
055311R5 Page 4 of 7
