0117015R1 Page 11 of 21
Figure 7A
7. Install worksurface
1. Carefully set the 2pc worksurface onto the table frame and
align the mounting holes-this will take 2-4 people.
Figure 7A
.
2.
Install (4) 1/4-20 x 2-3/4” PHM screws into the legs as
shown to secure the worksurface.
Figure 7B
.
3.
Install (14) 1/4-20 x 5/8” PHM screws as shown.
4. Install the same fasteners on the other end of the table.
5. Tighten all fasteners securely.
2pc
worksurface
Figure 7B
1/4-20 x 2-3/4” PHMS
(4 required)
1/4-20 x 5/8” PHMS
(14 required)
cantilever
worksurface
bracket
Phillips
screwdriver
Tools
Required
table frame