0112776R4 Page 3 of 9
Figure 2A
2. Attach cord channel rails to legs
A.
Orient the upper cord channel rails with the inside rail flanges pointing up
from the worksurface as shown.
Figure 2A
. Attach to the worksurface with
1/4-20 x 1/2” PHM screws.
B.
Orient the lower cord channel rails with the inside rail flanges pointing toward
the upper rail flanges as shown and attach the end of each rail to each leg
with (2) 1/4-20 x 1/2” PHM screws.
Figure 2B
.
1/4-20 x 1/2” PHMS
(2) at each end
lower cord
channel rail
upper cord channel rails
attached to worksurface with
1/4-20 x 1/2” PHM screws
Figure 2B
rail flanges on
inside pointing
toward each other
inside rail flanges point
toward each other
1/4-20 x 1/2” PHMS
(2) at each end
Leg
Lower rail
Upper rails
rear leg
(with grommet hole)
front leg
(no grommet)
Lower rail
