0120148 Page 4 of 13
2. Quick-release Doors
Each door can easily be removed for easier access using the quick-
release hinge lever located on the upper hinge pin of each door.
Figure 2
.
To remove, lift the lever while lifting out the door.
Figure 2
Quick-release
lever
Narrow flip-up panel
Lock
Audience-side
panel
3. Audience-side Panel
The audience-side panel can easily be removed for full interior access.
To remove:
1.
Push in the top of the narrow flip-up panel to access the locks.
(Do not pry open this panel).
Figure 3A
.
2. Unlock both locks while supporting the audience-side panel.
Figure 3B
.
3. Lift out the panel.
5. Moving and Parking the Lectern
• Before moving, unplug and secure all power cords.
• Close and lock doors.
•
Lower any flip-up shelves.
• Remove any items from the top of the worksurface.
• Unlock the casters.
• Push slowly and carefully. Do not move over uneven or irregular surfaces.
• Do not allow children to move.
• Lock the casters after moving.
•
Do not park unit in areas of heavy traffic.
• Do not run power cords across hallways, classrooms, or areas where
they will be walked on.
When lectern is unattended:
• Do not leave in areas where children have access.
• Keep doors closed and locked.
• Keep casters locked.
4. Caster Operation
Figure 4
1. Lock the brake levers to lock movement of the casters.
(Two instructor-side casters only).
Figure 4
.
2. To resume operation, lift up on brake levers.
Brake lever
Skirt
Note: The skirt is designed to be easily removable. It should be removed
if the lectern will be moved over long distances or thresholds to prevent
damage to the skirt panels.
Do not tip lectern to remove or install!
Push Here
Lock
Audience-side
panel
To Flip-up
Figure 3A
Figure 3B
