Micro800™ 4 Ch Universal Analog Input Module
17
Publication 0100189-04 Rev. C
Hazardous Location Considerations
This equipment is suitable for use in Class I, Division 2, Groups A, B, C,
D or non-hazardous locations only. The following WARNING statement
applies to use in hazardous locations.
EXPLOSION HAZARD
•
Substitution of components may impair
suitability for Class I, Division 2.
•
Do not replace components or disconnect
equipment unless power has been
switched off or the area is known to be
non-hazardous.
•
Do not disconnect equipment unless
power has been removed or the area is
known to be non-hazardous.
•
This product must be installed in an
enclosure.
•
All wiring must comply with N.E.C. article
501-4(b).
