OPERATION
UNPACKING AND INSPECTION
1.Carefully unpack and inspect the transilluminator for possible
damage in shipment. If any damage is noted, immediately notify
the carrier and supplier before using the unit.
2.Save the shipping carton and packing materials for future storing
or shipping of the unit.
3.Connect the plug of the cord first to the fused power entry unit
and then to a power outlet that complies with the electrical
requirements specified on the unit’s label.
DESCRIPTION
1. Filter
Transmits 254nm, 312nm and/or 365nm
wavelength UV radiations.
2. Filter Frame
Steel frame supports glass filter. Four
screws allow easy access to change
tubes or filters.
3. Timer (TC and
Serves as on/off power switch and allows
TL models)*
presetting of UV exposure time.
4. On/Off Switch
Controls power to the unit.
(TR and TS models)
5. Cooling Fan
Maintains cool unit operation.
6. Air Vents
Provide proper ventilation for UV tubes.
7. UV Tubes
Provide UV illumination.
8. Diffusing Screen
Eliminates light striations caused by the
contours of the tubes.
9. Fused Power Entry Unit Supplies power to the unit via the power
cord.
*Not Illustrated
4. On/Off Switch
8. Diffusing Screen
(under filter)
9. Fused Power Entry Unit
7. UV Tubes
(inside unit)
1. Filter
5. Cooling Fan
(inside unit)
6. Air Vents
(below unit)
2. Filter Frame
4
