Spectris SERVOPRO Chroma, Руководство оператора

Страница: 33 / 140

SERVOPRO CHROMA Gas Analyser
32 04400001A / Revision 7
3.1 General
Dimensions H x W x D
Master chassis:
Secondary chassis:
Auxiliary oven:
Stand-alone PC:
178 x 483 x 610 mm (7 x 19 x 24 ins)
178 x 483 x 610 mm (7 x 19 x 24 ins)
83 x 483 x 457 mm (3.3 x 19 x 18 ins)
178 x 483 x 130 mm (7 x 19 x 5.125
ins)
Weight:
Master chassis:
Secondary chassis:
Auxiliary oven:
Stand-alone PC:
11 - 27 kg (24.2
–
59.4 lbs)
11 - 27 kg (24.2
–
59.4 lbs)
7.5 kg (16.5 lbs)
5 kg (11 lbs)
Electrical supply requirements:
Voltage:
Frequency:
Power (maximum):
Master or Secondary chassis:
Auxiliary oven:
Stand-alone PC:
100 to 120 Vac or 220 to 240 Vac
1
,
2
50 to 60 Hz
400 VA
400 VA
60 VA
Fuse rating/type:
Master/Secondary chassis
Stand-alone PC
Two fuses 4 amp / 250 V, Time delay,
Type “T” or equivalent
miniature fuses
5 x 20 mm
Two fuses 1 amp / 250 V, Time delay
miniature fuses 5 x 20 mm
Carrier gas pressure rating
Minimum (plasma, TCD):
Minimum (FID):
Maximum:
630.6 kPa (90 psig)
828.6 kPa (120 psig)
828.6 kPa (120 psig)
Sample gas pressure rating
Minimum:
Maximum:
69.0 kPa (10 psig)
137.9 kPa (20 psig)
Detector type: Plasma, TCD and FID
Table 2 : General Specification
1
The analyser is supplied configured for operation with one of these voltage ranges. You must
specify the voltage range when you order the analyser
2
This analyser is rated in accordance to IEC 60664-3 Over Voltage Category II, Pollution Degree