Spectra
Pure
®
Inc.
215 S. Industrial Drive, Suite 2A Tempe, Arizona 85281-2941 480.894.5437 Fax us toll-free 1.877.527.7873
Call us toll-free 1.800.685.2783 E-mail [email protected] Visit us on the web www.spectrapure.com
2
Compact Design, Self-Contained Water Processing Unit
for Point-Of-Use or Point-Of-Entry Applications:
Easy to Install or Retrofi t: Four water connections and 115VAC or 230VAC.
Easy to Maintain: Uses Industry Standard components - no more proprietary parts or sole-
sourcing. All fi lters and components are on the front panel for easy access.
Single membrane can be changed in minutes, no need to remove membrane housings and fi ttings
to change membrane.
Water conserving design features 50% recovery - produces 1 gallon of water while sending only
1 gallon to drain. Other RO systems may waste as much as 4 gallons to produce 1 gallon of
purifi ed water. Many municipalities charge for water coming in as well as sewage. Not only is that
expensive but environmentally unsatisfactory, especially in drought-stricken areas.
Concentrate recirculation loop decreases membrane fouling by rapidly fl ushing the membrane at a
high velocity, greatly increasing membrane life.
Time-delayed inlet solenoid valve operates for several seconds before pump activates, protecting
the pump from dry starts and pump-destroying cavitation.
Low-voltage microprocessor-based control system with Auto Flush and Pump Protection. Flushes
membrane after each use and protects pump from running dry, preventing premature pump
failure.
These systems may be engineered for use with a single reservoir, multiple storage tanks or a
bladder tank.
Liquid level controls and sediment fi lter are included.
* A water softener may be required in some hard water areas.
** Additional pre-treatment may be required for brackish water.
Specifications for Back-Washable Carbon Pre-Filter (Required):
Power Requirements
Single phase, 60 Hz., 115 VAC, .3 Amps
Safety System Interlock
Prevents RO system from operating when
carbon fi lter is back washing
Dimensions
Tank sizes are available starting at 1 cu.ft.
Specifications for Water Softener (Optional):
Power Requirements
Single phase, 60 Hz., 115 VAC, .3 Amps
Safety System Interlock
Prevents RO system from operating when
water softener is regenerating
Dimensions
Tank sizes are available starting at 32K grain
capacity