SpectraPure
®
SpectraPure
®
Inc.
480.894.5437 Call us toll-free 1.800.685.2783
2167 East Fifth St, Tempe, Arizona 85281
8
SpectraPure
®
Inc
.
Assumes no responsibility for water damage due to
leaks. It is the user’s responsibility to determinethat the system is leak-free.
SYSTEM INITIALIZATION:
1. Attach the garden hose adapter
(connected to the black tubing)
to your cold water source. Never run hot water (greater than
113° F/45° C ) through the system.
2. Place the
yellow concentrate (waste) tubing
and the
blue purified
(product) water tubing
into a drain. Do not restrict flow from these
lines.
3. Open the cold water supply valve. You may use pressure up to 80 psi
(5.5 bar).
CAUTION: Check the system to ensure that all fittings are tight
and leak- free before leaving the system unattended. (If
anything is leaking, contact SpectraPure for assistance.)
NOTE: It is recommended that at least 2 gallons (7.57 liters) of purified
water be discarded now before collecting purified water for
use. If the unit is not used for several days, run the system for
at least 10 minutes before collecting any water. This will flush
out any stale water in the system.
4. Finish the installation by connecting the yellow line to a drain. The
blue line may be placed into a Rubbermaid™ trash can or set up
for automatic operation using a Liquid Level Controller (LLC-S-115),
(LLC-M-115) or the Auto ShutOff Kit (ASOFK).
