Spectral RM5100, Руководство пользователя

Страница: 9 / 24

The Musician’s PC
TM
6
S
e
tt
in
g
U
p
Y
o
u
r
S
y
s
te
m
M
o
n
ito
r
s
Connecting a Digital Monitor
1.
Turn off your computer.
2. Connect one end of the monitor’s signal cable to the video card’s DVI connector located on
the back of your chassis.
3. Connect the other end of the signal cable to the monitor’s DVI connector located at the back
of the monitor.
4. Secure the connections by tightening the two fasteners at each end of the signal cable.
5. Connect one end of the power cord to the monitor’s power connector located at the back of
the monitor.
6. Connect the other end of the power cord to a grounded three-prong power strip or wall outlet.
7. Turn on your computer.
Figure 2.2 – Connecting to a Single Digital Monitor
Rac k mount Systems
Connecting Dual Monitors
You can connect multiple monitors to your computer since your video card features
multi-monitor support (RM7100, RM7200, and the RM7400 only).
1. Turn off your computer.
2. Connect the DVI-to-VGA adapter or DVI cable to your video card’s DVI connector located
on the back of the chassis.
3. Connect one end of the first monitor’s signal cable to the DVI-to-VGA adapter.
4. Connect other end to the 15-pin D-Sub VGA connector at the back of the monitor.
5. Connect the second monitor’s signal cable to the video card’s 15-pin D-Sub VGA connector.
6. Connect other end to the 15-pin D-Sub VGA connector at the back of the monitor.
7. Secure the connections by tightening the fasteners at each end of the signal cables
(not too tight).
8. Connect the power cord to the 3-prong connector located at the back of the monitor.
9. Plug the power cord to a grounded power strip, uninterruptible power supply, or wall outlet.
10. Repeat steps 8 and 9 for the second monitor. Then turn on your computer.
(Continued on page 7)
DVI from Monitor
VGA Connector S-Video Connector DVI Connector