Spectral RM5100, Руководство пользователя

Страница: 11 / 24

The Musician’s PC
TM
Thermal Controller
Figure 2.4 – Thermal Controller
Features
•
Monitoring temperature of CPU, and System’s Rear and Front (SYS-r / SYS-f)
• Speed detection and control of 3 fans
•
The alarm sounds in the event of a fan malfunction or overheating
How to setup
1.
On the front bezel you can find buttons A and B for setup.
2. Temperature Limits Setup:
Press A for 3 seconds to set up maximum temperature
limit. Adjust the alarm temperature with button A and B when numbers are flashing.
The next setup setting will continue in 5 seconds. The factory default overheating settings
are set as CPU= 65 ºC, SYS-r (rear) = 55 ºC, SYS-f (front) = 50 ºC.
3. Time Setup:
Press button B for 3 seconds to adjust the time (minute and hour).
Use button A and B to select minutes when the number is flashing. Wait 3 seconds
for hour setup. Setup mode will terminate if left untouched over 3 seconds.
4. Temperature Type Selection: Press both button A and B to select ºF or ºC.
5. Alarm: An audible alarm will beep for 20 seconds in an overheat condition or if any
fan speed is lower than 600rpm. Fan RPM and Temperature digits will keep flashing until
the problem is solved.
8
T
h
e
r
m
a
l C
o
n
tr
o
lle
r
Rac k mount Systems
S
e
tt
in
g
U
p
Y
o
u
r
S
y
s
te
m
CAUTION: Do not attempt to install or repair the Thermal Controller unless you are a
trained computer technician. It is easy to break delicate components in the process, which
could void your warranty.
HDD Icon
Temperature CPU/SYS-r/SYS-f Fan Status
Fan Speed Clock Power Icon