Cyclus 3
Sequencer
PATTERN PAGE
To enter the pattern page, hit the pattern button once, so the led is lit.
Pattern number-
With this knob you selects the
pattern you want to
create
/edit/playback.
Sync
Int: The Cyclus runs in the tempo selected with the
BPM parameter and transmits midi clocks and the
real time commands continue and stop. The Cyclus
3 starts and stops also when realtime commands
are received.
Ext: The Cyclus receives midi-clock (F8), and runs
in sync with the connected external device. The
Cyclus 3 starts and stops also when realtime
commands are received.
BPM-
Adjust the tempo of the pattern (if sync is set to ”Int”).This setting is remembered within each
pattern. In song mode the patterns are also played back in their own original tempo’s – no destructive
song tempo setting!
TRACK PAGE
To enter the track page, hit the track button once, so it is lit.
Track -
Select the track you want to edit/record
and monitor on the LEDS.
Outp -
The selected track on/off.
Chan -
The selected tracks midi-channel. Note that
all tracks can have the same midi-channel, this
way accords can be done.
Func –
special functions.
www.spectralaudio.ch
Page 7
Pattern Sync. BPM
01 Int 120
Edit Page
Track
Pattern
Run/Stop
Pattern
Sync
BPM
Trak.Outp.Chan. Func
01 On 08 Off
Edit Page
Track
Pattern
Run/Stop
Trak
Outp
Chan
Func
