Cyclus 3
Sequencer
Edit page 15 – SONG EDIT.
Step –
Select song start step, and use it for song
editing. When you selects a step, it shows the
pattern number assigned to that step. If ”end” is
displayed, no pattern is assigned to the step. The
song will stop playback or loop, when the first end
mark arrives. Remember to set this to the step,
where you want the song to start, when you have
finished your editing.
Ptrn –
The pattern number assigned to the
selected step. Change and assign patterns with the
pattern turning knob. When you change/assign a
pattern, Cyclus 3 also saves the track on/off
settings for the pattern at that moment. If you want
a step to be the end step, turn the pattern knob all
the way right, and the display will show ”end”.
Loop –
Define how many times the chosen pattern
shall repeat.
Plays –
Shows what pattern it is currently playing.
Edit page 16 – SONG.
SONG/Songno. –
Choose the song number, you
want to play back / record. If the song is named
(see “Func”), this name will show on the display.
Mode/Play
Off:
will repeat the current Pattern.
1tm:
will play the song one time.
Loop:
will repeat the song until stop is
pressed.
Plays –
Shows what pattern it is currently playing.
www.spectralaudio.ch
Page 20
step Ptrn Loop Plays
01 01 02 01
Edit Page
Track
Pattern
Run/Stop
Step
Pattern
Loops
SONG Mode Plays
01 Songname 1tm 01
Edit Page
Track
Pattern
Run/Stop
Song
No.
Mode
