SpectraDynamics HPDA-15RM-C, Руководство по эксплуатации

Страница: 9 / 12

Copyright © SpectraDynamics, Inc. 2010
7
This unit is designed to operate only with the specified AC voltage on page 4
and +24
VDC. For conversion to a different voltage of operation contact
SpectraDynamics, Inc.
To operate the unit, locate the AC power entry module on the rear of the enclosure
and/or the DC connector and connect the power cord(s). Plug the unit into an
appropriate power outlet. The LED on the front panel labeled AC POWER will turn on
when you apply the AC voltage. If you also apply the DC voltage the LED labeled DC
POWER on the front panel should light up. Attach the signal to be distributed to one of
the SMA input connectors on the back panel. Any HPDA-15RM-C output may be used
to drive the input of another distribution module.
Absolute Maximum Ratings
Input power +20dBm Maximum
Reverse Power +20dBm Maximum
Input DC Voltage 10 VDC Maximum
Output DC Voltage
50 VDC Maximum
Storage Temperature -10 to +75 ºC
Operation Environment 0 to +50 ºC
Rack Mount Chassis
1U H, 19“ W, 14” D
Operation
SDI