SpectraDynamics HPDA-15RM-C, Руководство по эксплуатации

Страница: 6 / 12

Copyright © SpectraDynamics, Inc. 2010
4
AC POWER ENTRY MODULE
The HPDA-15RM-C is configured to operate on:

100-120 VAC

220-240 VAC
DC POWER ENTRY MODULE
Optional
Battery Backup Connector for +24 VDC Backup power source.
SMA INPUTS
The standard HPDA-15RM-C contains three amplifier modules each having one input
SMA connector. If you acquired a modified unit with only two HPDA modules the back
panel will contain only two SMA input connectors. The signal to be distributed should be
connected to the corresponding SMA jack labeled INPUT.
SMA OUTPUTS
There are five SMA OUTPUTS for each SMA INPUT. Any output may be used to drive
the input of another distribution module. The five outputs of each amplifier module are
DC isolated from the chassis ground to prevent ground loops. Make sure that the
amplifier ground does not float to a potential greater than 50 VDC from the chassis
ground. An output ground potential greater than 50 VDC will damage the amplifier and
could cause injury or death to personnel.
The Back Panel
SDI
The Back Panel
SDI