Spectracom Corporation
PathAlign-R
2200 / 2240 / 2241 PathAlign-R Manual
1-1
1
General Information
1.1
Introduction
The PathAlign-R™ test set is a high performance, complete test solution designed to quickly
and accurately optimize the transmission path between two microwave antenna sites. The
PathAlign-R directly drives the site’s antennas, allowing the optimization process to be done
without the need for on-site radios, complex test equipment, ground technicians, onsite AC
power, cell phones, or two-way radios.
1.1.1 About this Manual
This manual contains information pertaining to the specifications, installation, operation, and
maintenance of the Pendulum model 2200, 2200A, 2240, 2240A, 2241, 2241A, PathAlign-R
Microwave Antenna Alignment Test Sets, hereafter referred to as the PathAlign-R. The
2241/2241A models are identical to the 2240/2241A except that the 2241/2241A includes the
Record-R™ Data logging function with imbedded GPS receiver. These models operate on
battery power via an internal 12 VDC/2.3 Ah rechargeable sealed Lead Acid battery.
1.1.2 Declaration of Conformity
The complete text with formal statements concerning product identification, manufacturer and
standards used for type testing is available on request.
1.2
Preparation for Use
1.2.1 Introduction
Even though we know that you are eager to get going, we urge you to take a few minutes to
read through this part of the introductory chapter carefully before using the equipment.
Study this manual thoroughly to acquire adequate knowledge of the instrument, especially the
section on Safety Precautions hereafter and the
Installation
section.
1.3
Safety Precautions
1.3.1 Introduction
Personnel assigned to the operation or maintenance of the PathAlign-R are encouraged to
review the safety practices given in this section. These are recommended procedures which
may prevent a serious accident, save a life, or protect the PathAlign-R from damage.
The warranty commitments are rendered void if unauthorized access to the interior of the
instrument has taken place during the given warranty period.
