Spectra Watermakers AQUIFER 360 EXPEDITION, Руководство пользователя

Страница: 5 / 36

5
Getting Started Continued …
The Spectra Aquifer 360 Expedition systems come fully assembled and ready for use.
All connectors are marked for easy identification. The submersible pumps plug directly
into the 24vdc power supply.
Placement Ideally the system should be stored and used in a cool, dry, location within
20 feet of the feed water source. The system comes with 25’ of intake hose attached
to each of the submersible well pumps. The case is splash resistant, but not water
tight and the unit should be stored with the lid open until any water in the case has
evaporated. Choose a location where any water spilled during filter changes will not
be a problem. If the unit is to be installed in a mobile vehicle, it should be strapped it
down with webbing through the handles to keep it in place.
Feed Water The Aquifer Expedition is designed to be operated up to 20 feet above
the waterline and 50 feet from the edge of the source water (using optional hose kits
and power cables are included). If the source water is outside this range the system
may operate at a diminished capacity.
Brine Discharge Install the female quick disconnect fitting in the brine discharge hose
and route it to a convenient drain away the feed water source.
Feed Pressure Gauge
Product Flow Meter
Note that the Optional
AC only powered sys-
tems will have a pow-
er supply for the
pumps in the water-
maker box.