Beam Plunge centers the rotor vertically and can be used
to align the plumb beam to a desired vertical position,
e.g., when doing Interior layout.
Press and release the button at the Standard Display
and select >>Beam Plunge<<.
Press and release the button starts Beam Plunge.
The rotor checks the limits of the Y- axis and switches back to automatic
mode at the center position. (BP is flashing while all laser
LEDs are turned off)
Pressing the button at the laser or RC402N stops the movement and
changes the unit into manual mode.
Corrections up and down can be done using buttons;
for left/right corrections use buttons.
Press and release the button to change the unit
back to full automatic mode.
Beam Plunge using the RC402N menu
